Find us on: 
Note: All orders with merchandise totalling less than $50.00 are charged a Minimum Order Fee of $10.00 It will automatically added to your S&H. Buy more, save more!
MRF2-600M 600W Single Pole/Multi- Location Halogen/Incandescent Wireless RF Smart Dimmer
Product Description
Lutron MRF2-600M 600W Single Pole/Multi- Location Halogen/Incandescent Wireless RF Smart Dimmer
LUTRONMRF2600M
Description:
120V single pole/multi-location smart dimmer with RF receiver for control of halogen/incandescent lighting loads.
Features:
Lutron MRF2-600M Dimmer
Key Design Features Dimmers
On a single-tap, lights fade UP or DOWN. On a double-tap, lights go to full ON. When ON, press and hold to engage 20-second fade to OFF. Light levels can be fine-tuned by pressing and holding the dimming rocker until the desired light level is reached. Two-wire dimmers available.
Specifications Regulatory Approvals
UL Listed. CSA Certified. FCC Approved. Complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Industry Canada Certified.
All RF Local Controls
Tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2. Tested to withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits. Controls always operate locally and do not require system control. Power failure memory: should power be interrupted, the control will return to its previously set level prior to the interruption when power is restored. Uses conventional 3-way and 4-way wiring. Multiple location control from Dimmer/Switch and up to 9 Companion Dimmer(s) / Switch(es). Use Lutronฎ Designer (Claroฎ) wallplates or designer-style wallplates from other manufacturers. Wallplates are sold separately. Lutron Claro wallplates snap on with no visible means of attachment. Requires a 1-gang U.S. wallbox. 31⁄2 in (89 mm) deep recommended, 21⁄4 in (57 mm) deep minimum. Green indicator lights. System
Communications and Capacity
Maestro Wireless controls communicate with the PicoTM wireless controls and ceiling mount occupancy sensors through radio frequency (RF). Maestro Wireless local controls must be located within 30 feet (9 m) of a Pico wireless control or ceiling mount occupancy sensor. Up to 10 Maestro Wireless controls can be configured to work together.
Environment
Ambient operating temperature: 32 ฐF to 104 ฐF (0 ฐC to 40 ฐC), 0%-90% humidity, non-condensing. Indoor use only.
LUTRONMRF2600M
Description:
120V single pole/multi-location smart dimmer with RF receiver for control of halogen/incandescent lighting loads.
Features:
Lutron MRF2-600M Dimmer
Key Design Features Dimmers
On a single-tap, lights fade UP or DOWN. On a double-tap, lights go to full ON. When ON, press and hold to engage 20-second fade to OFF. Light levels can be fine-tuned by pressing and holding the dimming rocker until the desired light level is reached. Two-wire dimmers available.
Specifications Regulatory Approvals
UL Listed. CSA Certified. FCC Approved. Complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Industry Canada Certified.
All RF Local Controls
Tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2. Tested to withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits. Controls always operate locally and do not require system control. Power failure memory: should power be interrupted, the control will return to its previously set level prior to the interruption when power is restored. Uses conventional 3-way and 4-way wiring. Multiple location control from Dimmer/Switch and up to 9 Companion Dimmer(s) / Switch(es). Use Lutronฎ Designer (Claroฎ) wallplates or designer-style wallplates from other manufacturers. Wallplates are sold separately. Lutron Claro wallplates snap on with no visible means of attachment. Requires a 1-gang U.S. wallbox. 31⁄2 in (89 mm) deep recommended, 21⁄4 in (57 mm) deep minimum. Green indicator lights. System
Communications and Capacity
Maestro Wireless controls communicate with the PicoTM wireless controls and ceiling mount occupancy sensors through radio frequency (RF). Maestro Wireless local controls must be located within 30 feet (9 m) of a Pico wireless control or ceiling mount occupancy sensor. Up to 10 Maestro Wireless controls can be configured to work together.
Environment
Ambient operating temperature: 32 ฐF to 104 ฐF (0 ฐC to 40 ฐC), 0%-90% humidity, non-condensing. Indoor use only.
For large orders, please fill up Free Quote form and get huge discount! 
Note: All orders with merchandise totalling less than $50.00 are charged a Minimum Order Fee of $10.00 It will automatically added to your S&H. Buy more, save more!